LED Light Panels are dimmable as long as you use the proper controllers.
Our LED Light Panels do not come in a frameless option. The LED Light Panel frame is an important part of the heat dissipation of the product. Because of this, it extends the lifetime of your product. However, we are able to remove the frame from any side of the panel that does not have LEDs.
GLLS is not able to create organic shaped LED Light Panels due to the nature of the heatsink. Depending on project scale, we may be willing to invest in special engineering to create organic shapes. Contact us if you want to run your project by us for consideration.
The lead time for all LED Light Panels is between 7-10 days.
We make all of our fixtures to a custom size. See our LED Light Panel spec sheets for maximum as well as minimum sizes.
Lumen Maintenance (L70) of the LED Light Panels is around 50,000 hours; 5.7 years at 24 hours of operation over 365 days. The SMP (Switch Mode Power supply), however, will only last between , 20,000-30,000 hours.
For a diffuser, you can order LED Light Panels with a diffusion sheet on the lighted surface. A client must request this sheet when placing an order. Please note that this diffusion sheet will NOT cover or hide the frame.
Typically, when damage occurs to an LED Light Panel, it is only partly lit. Flexing the panel will damage the circuit board, causing dark or miscolored areas depending on the panel type. The damage can be hard to detect at the time of installation, but it will worsen over time. It is always important to handle an LED Light Panel …
The positive (+) wire on a static color temperature LED Light Panel will be a solid color. As for the the negative (-) wire, it has a dash pattern.
Closed face LED Light Panels have a wider frame of 15mm. An open face panel has a frame of 8mm. An open faced panel provides more light but does come with a risk of hot spots.
- Page 1 of 2