Maximum Length that can be ordered in a single run, without connectors, per type of packing: Product Line Profile Bending Direction Max Packing Length (m) Packing Methods Vivid Contour 09×18 Side Bending 50 Reel Packaging Vivid Basic 11×26 24V DC Side Bending 50 Reel Packaging Landscape 11×26 12V AC Side Bending 20 Plastic Tray Box / Reel Packaging Vivid S …
When a light fixture shorts, the power supply will turn on and off rapidly and cause a strobing effect. Listen to the power supply; if you hear a ticking, it is being overloaded due to a short in the light.
We make our standard mounting channel with anodized aluminum. We also make our self-locking mounting channel with the same anodized aluminum. This channel has the addition of a special stainless steel locking clip. We also make our 2in mounting clip version of this channel with the same materials. We make our plastic mounting channel with a plastic polycarbonate with UV …
We injection-mold seamless connectors at the time of manufacturing and are a guaranteed weather-tight seal. A snap connector is DIY, and clients must install them on-site. When properly installed, snap connectors are weatherproof.
Our standard color jacketed Vivid S Pantone and RAL codes are as follows: Red: Pantone – 711C RAL – RAL 3028 Green: Pantone – 3278C RAL – RAL 6024 Blue: Pantone – 2103C RAL – RAL 1012 Yellow: Pantone – 103C RAL – RAL 5000
Our flexible PCB is off-center in the lights. Because of this, 01 ends and 02 ends require differently set pins to connect properly. The lead wires depend on the location of the PCB.
With a Dynamic White fixture, you can set specific color temperatures between warm white and cool white. These fixtures require DMX controllers as well as decoders for operation.
IP68 is the rating our fixtures have earned through rigorous testing. The 6 refers to protection against dust, and is the highest achievable number meaning our fixtures are dust-tight. The 8 refers to water ingress, and means the product is submersible up to 39in (1m) in water.
The Vivid Pixel fixture will turn a solid blue when it is receiving power, but not data. What if blue dots illuminate on the fixture? This occurs when the connection of data is to the signal output side instead of the signal input side.
The color temperature difference of 300K +/- may occur between PVC batches.