The Differences Between Fixture Profiles

In our last Tech Talk, we covered recognizing reverse polarity. This week we’re going to discuss the differences between LED Neon Flex profiles. LED Neon Flex fixtures come in a variety of sizes and light profiles. Choosing the appropriate profile for your project depends on the size and beam angle you want. What is a beam angle? The beam angle …

GLLS-Reverse-Polarity

Recognizing Reverse Polarity

In our last Tech Talk, we covered the difference between open and closed face LED Light Panels. This week we’re going to discuss how to recognize reverse polarity. What is reverse polarity? Reverse polarity, in our case, typically happens during installation. When the wires of the LED Neon Flex fixture are not connected to the proper ports in the decoder, …

Open and Closed Face LED Light Panels

In our last Tech Talk, we covered the difference between Class 2 and Class II power supplies. This week , we’re going to talk about the difference between Open and Closed Face LED Light Panels. We’ve had a lot of questions recently asking what the visual difference between Open and Closed face panels and which was ideal for their project. …

GLLS-LED-Power-Supply

The Difference Between LED Class 2 and Class II Power Supplies

In our last Tech Talk, we covered how to cut your fixture and install snap connectors. This week, we’re going to discuss the difference between Class 2 and Class II power supplies! It can be difficult to specify a power supply for your project. It’s especially difficult when you’re specifying between Class 2 and Class II. The difference is a …

GLLS-Client-Showcase

GLLS Client Showcase – What We Can Do For You!

Have you noticed the Client Showcase section on our website? GLLS uses this section of our website to introduce our client’s work to our site visitors! We love to promote our clients alongside our products. We’re happy to showcase any project done with our products – from LED Neon Flex to LED Light Boxes! Want to have your work posted? …

GLLS-Snap-Connector-Setup

Cutting Fixtures & Installing Snap Connectors

In our last Tech Talk, we covered controlling an RGB fixture with the SLESA. This week, we’re going to cover how to cut your fixture as well as how to install snap connectors! Cutting Fixtures Installing Snap Connector Lead & End Cap Click here to jump to our Snap Connector assembly video. Here are the tools and products we’re using …

Controlling-Your-RGB-Fixture-With-The-SLESA

Controlling Your RGB Fixture With The SLESA

In our last Tech Talk, we covered the difference between 01 and 02 ends. This week, we’re going to cover controlling RGB fixtures with the SLESA! Click here to check out our Introduction to ESA2 video at the bottom of the post! SLESA controllers aren’t just for programming Vivid Pixel! They are also excellent for controlling groups of RGB fixtures. …