Pixel with Digidot Controller

LED Neon flex Vivid Pixel GLLS Vivid Pixel fixtures represent one of the most versatile LED flexible products in the market. Our LED Neon Flex line includes: Vivid S 160 Pixel Vivid S 270 Pixel Vivid Wave Pixel Vivid Wave 320 Pixel Vivid Light Strip Pixel We offer different profiles, beam angle, bending direction, lumen output, voltage, pixel length, among …

GLLS-Decoder-DMX-2900

Vivid Pixel with Decoder DMX-2900

Let’s take a look at the DMX-2900, one of the decoders that GLLS offers for use with our Vivid Pixel products. What is it? It is a DMX to SPI decoder, but it was created with a very specific purpose and some might not be aware of its advantages. This decoder can be applied normally as an SPI decoder, just …

GLLS-LED-Flexible-Neon-Bending

How To Properly Bend LED Neon Flex

In our last Tech Talk, we discussed some commonly overlooked details. This week, we’re going to take a look at how to properly bend an LED Neon Flex Fixture as well as a few good practices. Bending Profiles LED Neon Flex comes in two bending profiles: side and top bending. The location of the PCB within a side bending fixture …

The Differences Between Fixture Profiles

In our last Tech Talk, we covered recognizing reverse polarity. This week we’re going to discuss the differences between LED Neon Flex profiles. LED Neon Flex fixtures come in a variety of sizes and light profiles. Choosing the appropriate profile for your project depends on the size and beam angle you want. What is a beam angle? The beam angle …

GLLS-Reverse-Polarity

Recognizing Reverse Polarity

In our last Tech Talk, we covered the difference between open and closed face LED Light Panels. This week we’re going to discuss how to recognize reverse polarity. What is reverse polarity? Reverse polarity, in our case, typically happens during installation. When the wires of the LED Neon Flex fixture are not connected to the proper ports in the decoder, …

Open and Closed Face LED Light Panels

In our last Tech Talk, we covered the difference between Class 2 and Class II power supplies. This week , we’re going to talk about the difference between Open and Closed Face LED Light Panels. We’ve had a lot of questions recently asking what the visual difference between Open and Closed face panels and which was ideal for their project. …

GLLS-Snap-Connector-Setup

Cutting Fixtures & Installing Snap Connectors

In our last Tech Talk, we covered controlling an RGB fixture with the SLESA. This week, we’re going to cover how to cut your fixture as well as how to install snap connectors! Cutting Fixtures Installing Snap Connector Lead & End Cap Click here to jump to our Snap Connector assembly video. Here are the tools and products we’re using …

Controlling-Your-RGB-Fixture-With-The-SLESA

Controlling Your RGB Fixture With The SLESA

In our last Tech Talk, we covered the difference between 01 and 02 ends. This week, we’re going to cover controlling RGB fixtures with the SLESA! Click here to check out our Introduction to ESA2 video at the bottom of the post! SLESA controllers aren’t just for programming Vivid Pixel! They are also excellent for controlling groups of RGB fixtures. …