Lumiform OrbitLS
technical data sheet
Legacy Product CODE
NEW PRODUCT CODE
I1M3W1B9E2CG
PHysical
electrical
Top & Side: 47.24in (1200mm)
Top & Side: 47.24in (1200mm)
Top & Side: 47.24in (1200mm)
operating voltage
24V DC
Circuit type
CC
power consumption
2.74W/ft (9W/m)
IC Type
Blue
10 Year Warranty
10 year
24V DC
IK10 Protection*
IP67 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
Static
led chip + CRI
Pro LED Chip
led count
21 LEDs/ft (70 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free air convection
Ambient installation
> -40°F (-40°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
3.94in (100mm)
1 Connector
full / dynamic loads
32.8ft (10m) / N/A
2 Connectors
full / dynamic loads
32.8ft (10m) / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
UKCA; EPD; CE; UL
cord color
White (Black available upon request)
connectors
Silicone Seamless
mounting
SS In-Ground Flexible
optical pARAMETERS
color BReakdown
Blue
Fixture cri
N/A
fixture color tolerance
N/A
wavelength/cct
468-474nm
led cri
N/A
led color tolerance
N/A
lumen count
>34 lm/ft (>110 lm/m)
BEEM angle
lumen maintenance
NOTES
1. Drive Over 2.5T weight rated, anti-slip and stamp on icons to be added. 2. Due to our production process, the maximum running length we can currently produce for this product is 10 meters. Therefore, the maximum running length with double power feed connectors is also 10 meters. 3. *The highest achievable IP rating with appropriate connector accessories & The highest achievable IK rating with appropriate mounting accessories.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
378 coverdale rd.,
unit a, riverview nb, E1B 3J7
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
