Multiflex Orbit
technical data sheet
Legacy Product CODE
M1L3E4N0L3VFH
NEW PRODUCT CODE
M1L3E4N0L3VFH
PHysical
electrical
Top & Side: 11.81in (300mm)
Top & Side: 11.81in (300mm)
Top & Side: 11.81in (300mm)
operating voltage
24V DC
Circuit type
Constant Voltage (CV)
power consumption
6.71W/ft (22W/m)
IC Type
N/A
RGBW-40K
fixture specifications
led function
SPI-Pixel
led chip + CRI
Pro LED Chip + CRI80
led count
TBA
temperatureS
Ambient Operating
-40°F to 140°F (-40°C to 60°C)
thermal management
Free air convection
Ambient installation
-40°F to 140°F (-40°C to 60°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
TBA
3.28in (83.3mm)
1 Connector
full / dynamic loads
16.4ft (5m) / TBA
2 Connectors
full / dynamic loads
16.4ft (5m) / TBA
safety / testing
jacket/base + LENS color
White Jacket/Black Base + Diffused
testing
cord color
White (Black available upon request)
connectors
Silicone Seamless
mounting
Aluminum: Basic, Recessed, Silicone Grip, Recessed Silicone Grip, Flexible. Silicone Profile - Flexible.
optical pARAMETERS
color BReakdown
R; G; B; 4000K
Fixture cri
80
fixture color tolerance
N/A
wavelength/cct
618-624nm; 522-530mn; 468-474nm; 4000±225K
led cri
N/A
led color tolerance
N/A
lumen count
>37lm/ft (120lm/m); 98lm/ft (320lm/m); 18lm/ft (60lm/m); 91lm/ft (300lm/m)
BEAM angle
lumen maintenance
TBA
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.Due to fragility, five-wire fixtures are not recommended to exceed 16.4ft (5m).Max Run: Dynamic = RGBW <100%; Full Load = RGBW at 100%.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.For UL Class 2 calculations, GLLS uses a maximum output of 96 W / 96 VA for 24 V circuits, unless otherwise confirmed by the listed driver. All runs are assumed to be single-feed from one Class 2 output. Dual-feeding from separate drivers does not qualify as Class 2 unless the run is electrically split into isolated sections.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
