Multiflex OrbitGX
technical data sheet
Legacy Product CODE
NEW PRODUCT CODE
M1N3W7Q0N2CJE
PHysical
electrical
T:15.75in (400mm) S:31.5in (800mm)
T:15.75in (400mm) S:31.5in (800mm)
T:15.75in (400mm) S:31.5in (800mm)
operating voltage
24V DC
Circuit type
CC
power consumption
7.31W/ft (24W/m)
IC Type
N/A
5700K
5 or 10 Year Warranty
5 Year
24V DC
IK10 Protection*
IP67 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
Direct DMX/Pixel
led chip + CRI
Pro LED Chip + CRI80
led count
8 LEDs/ft (28 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free air convection
Ambient installation
? -40°F (-40°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
9.84in (250mm) 7 LEDs
1 Connector
full / dynamic loads
16.4ft (5m) / N/A
2 Connectors
full / dynamic loads
32.8ft (10m) / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
UKCA; EPD; CE; UL
cord color
White (Black available upon request)
connectors
Silicone Seamless Connector
mounting
Aluminum Profile Silicone Grip; Aluminum Profile Silicone Grip with Raceway; and Aluminum Profile Flexible.
optical pARAMETERS
color BReakdown
5700K
Fixture cri
80
fixture color tolerance
<3SDCM
wavelength/cct
5665±355K
led cri
80
led color tolerance
3SDCM
lumen count
>549lm/ft (>1800lm/m)
BEEM angle
lumen maintenance
15*60°
NOTES
1. The light can only be bent along the light surface. Do not bend smaller than allowed minimum bend diameter. 2. The fixture color tolerance standards for Silicone products are 3 SDCM within the same production runs, and the variance remains below 5 SDCM from one production run to the next. 3. The constant Current (CC) Integrated Circuit is only used to extend max run length.Do not use a constant Current (CC) power supply in line with the fixture as it may cause damage. 4. *The highest achievable IP rating with appropriate connector accessories & The highest achievable IK rating with appropriate mounting accessories. 5. IK10 with rigid aluminum proifles, IK08 with aluminum flexible profiles. 6. Single Connector (Full/Dynamic Loads): The standard maximum running length for a single connector is 2 meters. However, by utilizing male/female connectors in a daisy chain configuration, the length can be extended up to 5 meters for both full and dynamic loads. Double Connector (Full/Dynamic Loads): The standard maximum running length is 2 meters. With the use of male/female connectors and a daisy chain setup, the length can be extended up to 10 meters when using double power feeds, supporting both full and dynamic loads.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
378 coverdale rd.,
unit a, riverview nb, E1B 3J7
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
