Sauna Flex Wave: Silicone - 24V
technical data sheet
Order Code:
S1F2P9T2B3VL
Legacy Code:
SF16E1012WEDTW24DV
Profile Capabilities
11.81in (300mm)
11.81in (300mm)
11.81in (300mm)
Temperatures
Ambient Operating Temperature:
-40°F to 203°F (-40°C to 95°C)
Max Mounting Surface Temperature:
203°F (95°C)
Ambient Installation Temperature:
-40°F to 122°F (-40°C to 50°C)
Humidity (Non-Condensing):
100%
Fixture Storage Temperature:
-40°F to 140°F (-40°C to 60°C)
Thermal Management:
Free Air Convection
Certifications & Features
FLAME
UV
Solvent
Salt Water
UV
Solvent
Salt Water
Electrical
Operating Voltage
24V DC CV
Circuit Type
Constant Voltage (CV)
Power Consumption
1.37W/ft (4.5W/m)
IC Type
24V DC CV
Fixture Specifications
LED Function
Dim to Warm
LED Chip + CRI
Epistar SMD LED Chip + CRI80
LED COunt
4 LEDs/ft (16LEDs/m)
Order Unit (Cutting Unit)
2.46in (62.5mm) (12LEDs)
Max Run Length: 1 Connector
(Full/Dynamic Loads)
32.8ft (10m) / N/A
Max Run Length: 2 Connectors (Full/Dynamic Loads)
Not Recommended
UL Class 2 Max Run
N/A
LED COLOR
1800K~3000K
Cord Color
White (Black available upon request)
Jacket/base + Lens Color
Opal + Diffused
Connectors
Silicone Seamless
Mounting
Aluminum: Basic, Recessed, Silicone Grip, Recessed Silicone Grip, Flexible. Plastic Reinforced, Stainless Steel Clip and Silicone Profile - Flexible.
OPtical Parameters
Color Breakdown
1800K; 3000K; 1800K+3000K
Wavelength/CCt
1800 ± 150K ; 3000 ± 175K
Lumen Count
1 lm/ft (2 lm/m); 61 lm/ft (200 lm/m)
LUMEN MAINTENANCE
Wet Sauna 1.82W/ft (6W/m): L70 51,000 hours (@149°F, 65°C); (2) Dry Sauna 1.82W/ft (6W/m): L70 36,000 hours (@194°F, 90°C)
Fixture cri
80
led cri
N/A
fixture color tolerance
3 SDCM
led color tolerance
<2.3 SDCM; <2.3 SDCM
Safety/Testing + NOTES
UL CERTIFICATE #
UL 2108 Class 2
Report referance#
E347880/20130508
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.Install at least 31.5in (80cm ) away from heat sources.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.For UL Class 2 calculations, GLLS uses a maximum output of 96 W / 96 VA for 24 V circuits, unless otherwise confirmed by the listed driver. All runs are assumed to be single-feed from one Class 2 output. Dual-feeding from separate drivers does not qualify as Class 2 unless the run is electrically split into isolated sections.
glls.com | 1.888.580.6366 | 1075 american pacific dr., sutie A, henderson, NV 89074
Version 2.0
Updated On
August 20, 2026
Sauna Flex Wave: Silicone - 24V
technical data sheet
Legacy Product CODE
SF16E1012WEDTW24DV
NEW PRODUCT CODE
S1F2P9T2B3VL
PHysical
electrical
operating voltage
24V DC
Circuit type
Constant Voltage (CV)
power consumption
1.37W/ft (4.5W/m)
IC Type
N/A
1800K~3000K
fixture specifications
led function
Dim to Warm
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
4 LEDs/ft (16LEDs/m)
temperatureS
Ambient Operating
-40°F to 203°F (-40°C to 95°C)
thermal management
Free Air Convection
Ambient installation
-40°F to 122°F (-40°C to 50°C)
max mounting surface
203°F (95°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
100%