Vivid Wave: Silicone - 24V
technical data sheet
Legacy Product CODE
SF16E1015DEPDW24DC
NEW PRODUCT CODE
V1F1W7U2G2CQ
PHysical
electrical
11.81in (300mm)
11.81in (300mm)
operating voltage
24V DC
Circuit type
Constant Current (CC)
power consumption
3.66W/ft (12W/m)
IC Type
UCS512CN
2200K~5700K
10 Year Warranty
24V DC
IK10 Protection*
IP68 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
Direct DMX/Pixel
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
50 LED/ft (168 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 45°C)
thermal management
Free air convection
Ambient installation
-40°F to 122°F (-40°C to 45°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
6.56in (166.7mm) (28 LEDs)
1 Connector
full / dynamic loads
19.6ft (6m) / Not Recommended
2 Connectors
full / dynamic loads
39.4ft (12m) / Not Recommended
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.
cord color
White (Black available upon request)
connectors
End, side & bottom lead wires
mounting
Standard Aluminum Channel,Recessed Aluminum Channel,Standard Aluminum Channel with Silicone Grip,Recessed Aluminum Channel with Silicone Grip,Transparent Reinforced Plastic Channe,Bendable Serrated Aluminum Channel
optical pARAMETERS
color BReakdown
2200K; 5700K
Fixture cri
80
fixture color tolerance
3 SDCM
wavelength/cct
2238 ± 66K; 5669 ± 305K
led cri
82-87; 82-87
led color tolerance
2.3SDCM; 2.3SDCM
lumen count
76lm/ft (250lm/m); 85lm/ft (280lm/m)
lumen maintenance
70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°C 50,000 Hours L70 @ 50°C : 70,000 Hours L50 @ 50°C
NOTES
1) Due to the fragility of five-wire light fixtures, GLLS does not recommend exceeding lengths longer than 16.4ft(5m) 2) It is not recommended to use dynamic load calculations to determine max distance for this profile.
*The highest achievable IP rating with appropriate connector accessories & The highest achievable IK rating with appropriate mounting accessories.
*The constant Current (CC) Integrated Circuit is only used to extend max run length. Do not use a constant Current (CC) power supply in line with the fixture as it may cause damage.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
378 coverdale rd.,
unit a, riverview nb, E1B 3J7
disclaimer
glls, reserves the right to make any design changes for continuous impovement which will not affect the overall apperance or performance
