Vivid Wave XL: Silicone - 24V
technical data sheet
Legacy Product CODE
SF19E0013WERGB24DC
NEW PRODUCT CODE
V1G2W5S1J2CF
PHysical
electrical
11.81in (300mm)
11.81in (300mm)
operating voltage
24V DC
Circuit type
Constant Current (CC)
power consumption
5.03W/ft (16.5W/m)
IC Type
N/A
RGB
10 Year Warranty
24V DC
IK10 Protection*
IP68 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
SPI/Pixel
led chip + CRI
Epistar SMD LED Chip
led count
25 LEDs/ft (84 LEDs/m)
temperatureS
Ambient Operating
40 to 113? (40 to 45?)
thermal management
Free air convection
Ambient installation
40 to 122? (40 to 50?)
max mounting surface
185? (85? )
fixture storage
40 to 140? (40 to 60?)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
3.28in (83.3mm) (7LEDs)
1 Connector
full / dynamic loads
32.8ft (10m) / Not Recommended
2 Connectors
full / dynamic loads
65.6ft (20m) / Not Recommended
safety / testing
jacket/base + LENS color
White + Diffused
testing
UL2108 Class 2, CEEMC, IS 10322
cord color
White (Black available upon request)
connectors
End, side & bottom lead wires
mounting
Serrated Aluminum Profile, Flange Serrated Aluminum Profile, Bendable Serrated Aluminum Profile
optical pARAMETERS
color BReakdown
R; G; B; R+G+B
Fixture cri
N/A
fixture color tolerance
N/A
wavelength/cct
618624nm; 522530nm; 468474nm; N/A
led cri
N/A
led color tolerance
3nm; 3nm; 3nm; N/A
lumen count
40lm/ft (130lm/m); 104lm/ft (340lm/m); 20lm/ft (65lm/m); 163lm/ft (535lm/m)
lumen maintenance
70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°C 50,000 Hours L70 @ 50°C : 70,000 Hours L50 @ 50°C
NOTES
1) Max Run Length: Dynamic = when the R, G, B channels are not operating at 100%, Full Load = when the R, G, B channels are operating at 100%. 2) It is not recommended to use dynamic load calculations to determine max distance for this profile.
*The highest achievable IP rating with appropriate connector accessories & The highest achievable IK rating with appropriate mounting accessories.
*The constant Current (CC) Integrated Circuit is only used to extend max run length. Do not use a constant Current (CC) power supply in line with the fixture as it may cause damage.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
378 coverdale rd.,
unit a, riverview nb, E1B 3J7
disclaimer
glls, reserves the right to make any design changes for continuous impovement which will not affect the overall apperance or performance
