Vivid C12: Silicone - 24V
technical data sheet
Legacy Product CODE
SF12J1012WE57K24DV
NEW PRODUCT CODE
V1K1W1Q8E3VR
PHysical
electrical
3.94in (100mm)
3.94in (100mm)
3.94in (100mm)
operating voltage
24V DC
Circuit type
Constant Voltage (CV)
power consumption
2.74W/ft (9W/m)
IC Type
N/A
5700K
fixture specifications
led function
Static
led chip + CRI
DOM LED Chip + CRI80
led count
42 LEDs/ft (140 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free air convection
Ambient installation
-40°F to 131°F (-40°C to 55°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
0.56in (14.28mm) (2 LEDs)
1 Connector
full / dynamic loads
19.6ft (6m) / N/A
2 Connectors
full / dynamic loads
39.4ft (12m) / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Silicone Seamless
mounting
Aluminum Silicone Grip
optical pARAMETERS
color BReakdown
5700K
Fixture cri
80
fixture color tolerance
<3SDCM
wavelength/cct
5665 ± 355K
led cri
82~87
led color tolerance
<2.3SDCM
lumen count
128lm/ft (420lm/m)
BEAM angle
lumen maintenance
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories. Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details. Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs. Max run length is based on static full load unless otherwise noted for dynamic use. Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
