Vivid C12: Silicone - 24V
technical data sheet
Legacy Product CODE
SF12J1015WER4024DV
NEW PRODUCT CODE
V1K1W4N8E3VC
PHysical
electrical
3.94in (100mm)
3.94in (100mm)
operating voltage
24V DC
Circuit type
CV
power consumption
2.7W/ft (9W/m)
IC Type
N/A
RGBW-40K
3 Year
24V DC
IK10 Protection
IP67 Protection
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
RGBW PWM
led chip + CRI
DOM LED Chip + CRI80
led count
73 LEDs/ft (240 LEDs/m)
temperatureS
Ambient Operating
-40°F to 113°F (-40°C to 45°C)
thermal management
Free air convection
Ambient installation
-40°F (-40°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
1.97in (50mm) 12 LEDs (6+6)
1 Connector
full / dynamic loads
16.4ft (5m) / 26.2ft (8m)
2 Connectors
full / dynamic loads
32.8ft (10m) / 52.4ft (16m)
safety / testing
jacket/base + LENS color
White + Diffused
testing
UL 2108 CLASS 2; CE-EMC; IS10322
cord color
White (Black available upon request)
connectors
Silicone Seamless
mounting
Aluminum - Silicone Grip
optical pARAMETERS
color BReakdown
R; G; B; 4000K
Fixture cri
80
fixture color tolerance
N/A;N/A;N/A;<3SDCM
wavelength/cct
618-624nm; 522-528nm; 468-474nm; 3985 ± 150K
led cri
N/A;N/A;N/A;82-87
led color tolerance
<3nm; <3nm;<3nm;<2.3SDCM
lumen count
11lm/ft (35lm/m); 20lm/ft (65lm/m);5lm/ft (15lm/m); 30lm/ft (100lm/m)
lumen maintenance
70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°C 50,000 Hours L70 @ 50°C : 70,000 Hours L50 @ 50°C
NOTES
The fixture color tolerance standards for Silicone products are 3 SDCM within the same production runs, and the variance remains below 5 SDCM from one production run to the next.
*The highest achievable IP rating with appropriate connector accessories & The highest achievable IK rating with appropriate mounting accessories.
The illuminated light length shall be an integral multiple of min. cutting length.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
378 coverdale rd.,
unit a, riverview nb, E1B 3J7
disclaimer
glls, reserves the right to make any design changes for continuous impovement which will not affect the overall apperance or performance
