Vivid S270: PVC - 24V
technical data sheet
Legacy Product CODE
NF11D1012WERED24DC
NEW PRODUCT CODE
V2D1W1E1D2CH
PHysical
electrical
4.72in (120mm)
4.72in (120mm)
operating voltage
24V DC
Circuit type
Constant Current (CC)
power consumption
2.43W/ft (8W/m)
IC Type
N/A
Red
5 Year Warranty
24V DC
IK10 Protection*
IP68 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip
led count
22 LEDs/ft (72 LEDs/m)
temperatureS
Ambient Operating
-4°F to 122°F (-20°C to 50°C)
thermal management
Free air convection
Ambient installation
32°F to 122°F (0°C to 50°C)
max mounting surface
140°F (60°C)
fixture storage
-4°F to 140°F (-20°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
4.92in (125mm) (9 LEDs)
1 Connector
full / dynamic loads
49.21ft (15m) / N/A
2 Connectors
full / dynamic loads
98.43ft (30m) / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.
cord color
White (Black available upon request)
connectors
Swivel; Snap; Click; PVC Seamless; and PVC Submersible.
mounting
Aluminum: Basic; Recessed; Silicone Grip; Silicone Grip Recessed; Flexible; Raceway; Raceway Suspended. Plastic Reinforced and Stainless Steel Clip.
optical pARAMETERS
color BReakdown
Red
Fixture cri
N/A
fixture color tolerance
N/A
wavelength/cct
618-624nm
led cri
N/A
led color tolerance
3nm
lumen count
42.67lm/ft (140lm/m)
lumen maintenance
70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°C 50,000 Hours L70 @ 50°C : 70,000 Hours L50 @ 50°C
NOTES
1) If Max Run Length is over 65.62ft(20m), recommended maximum length for one run will be 65.62ft(20m) for handling capability. 2) Max Run Length: Unless otherwise stated, snap and seamless run lengths are the same.
*The highest achievable IP rating with appropriate connector accessories & The highest achievable IK rating with appropriate mounting accessories.
*The constant Current (CC) Integrated Circuit is only used to extend max run length. Do not use a constant Current (CC) power supply in line with the fixture as it may cause damage.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
378 coverdale rd.,
unit a, riverview nb, E1B 3J7
disclaimer
glls, reserves the right to make any design changes for continuous impovement which will not affect the overall apperance or performance
