Vivid S270: PVC - 24V
technical data sheet
Legacy Product CODE
NF11D1012W27R24DC
NEW PRODUCT CODE
V2D1W1J3G2CF
PHysical
electrical
4.72in (120mm)
4.72in (120mm)
4.72in (120mm)
operating voltage
24V DC
Circuit type
Constant Current (CC)
power consumption
3.66W/ft (12W/m)
IC Type
2700K
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip + CRI90
led count
22 LEDs/ft (72 LEDs/m)
temperatureS
Ambient Operating
-4°F to 113°F (-20°C to 45°C)
thermal management
Free air convection
Ambient installation
32°F to 113°F (0°C to 45°C)
max mounting surface
140°F (60°C)
fixture storage
-4°F to 140°F (-20°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
N/A
3.28in (83.3mm) (6 LEDs)
1 Connector
full / dynamic loads
32.8ft (10m) / N/A
2 Connectors
full / dynamic loads
65.6ft (20m) / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Swivel; Snap; Click; PVC Seamless; and PVC Submersible.
mounting
Aluminum: Basic; Recessed; Silicone Grip; Silicone Grip Recessed; Flexible; Raceway; Raceway Suspended. Plastic Reinforced and Stainless Steel Clip.
optical pARAMETERS
color BReakdown
2700K
Fixture cri
90
fixture color tolerance
3 SDCM
wavelength/cct
2725 ± 145K
led cri
91-97
led color tolerance
2.3SDCM
lumen count
89.9lm/ft (295lm/m)
BEEM angle
lumen maintenance
Round profile 270°
L70 53,000 hours (77°F, @25°C), 51,000 hours (113°F, @45°C), based on 3.66W/ft (12W/m)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length—see connector specs for details.The Constant Current (CC) Integrated Circuit extends max run length. Do not use a CC power supply, as it may cause damage.PVC products maintain ≤3 SDCM within a production run and <6 SDCM between production runsMax run length is based on static full load unless otherwise noted for dynamic use.For runs over 65.62ft (20m), recommended to limit each to 65.62ft for easier handling.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
