Vivid S270: PVC - 24V
technical data sheet
Legacy Product CODE
NF11D1013WE22K24DC
NEW PRODUCT CODE
V2D1W5H2G2CH
PHysical
electrical
4.72in (120mm)
4.72in (120mm)
operating voltage
24V DC
Circuit type
Constant Current (CC)
power consumption
3.66W/ft (12W/m)
IC Type
UCS2903
2200K
5 Year Warranty
24V DC
IK10 Protection*
IP68 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
SPI/Pixel
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
17 LED/ft (56 LED/m)
temperatureS
Ambient Operating
-4°F to 113°F (-20°C to 45°C)
thermal management
Free air convection
Ambient installation
32°F to 113°F (0°C to 45°C)
max mounting surface
140°F (60°C)
fixture storage
-4°F to 140°F (-20°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
4.92in (125mm) (7 LEDs)
1 Connector
full / dynamic loads
32.81ft (10m) / Not Recommended
2 Connectors
full / dynamic loads
65.62ft (20m) / Not Recommended
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.
cord color
White (Black available upon request)
connectors
Swivel; Snap; Click; PVC Seamless; and PVC Submersible.
mounting
Aluminum: Basic; Recessed; Silicone Grip; Silicone Grip Recessed; Flexible; Raceway; Raceway Suspended. Plastic Reinforced and Stainless Steel Clip.
optical pARAMETERS
color BReakdown
2200K
Fixture cri
80
fixture color tolerance
3 SDCM
wavelength/cct
2238 ± 102K
led cri
82-87
led color tolerance
2.3SDCM
lumen count
107.00lm /ft (350lm/m)
lumen maintenance
70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°C 50,000 Hours L70 @ 50°C : 70,000 Hours L50 @ 50°C
NOTES
1) Max Run Length: Dynamic = when the R, G, B channels are not operating at 100%, Full Load = when the R, G, B channels are operating at 100%. 2) Max Run Length: Unless otherwise stated, snap and seamless run lengths are the same. 3) It is not recommended to use dynamic load calculations to determine max distance for this profile.
*The highest achievable IP rating with appropriate connector accessories & The highest achievable IK rating with appropriate mounting accessories.
The fixture color tolerance standards for PVC products are 3 SDCM within the same production runs, and the variance remains below 6 SDCM from one production run to the next.
*The constant Current (CC) Integrated Circuit is only used to extend max run length. Do not use a constant Current (CC) power supply in line with the fixture as it may cause damage.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
378 coverdale rd.,
unit a, riverview nb, E1B 3J7
disclaimer
glls, reserves the right to make any design changes for continuous impovement which will not affect the overall apperance or performance
